User manual

14
PLENUE D3 has a high quality balanced line-out port that outputs + and - audio signals.
1. Connect balanced cable-supporting headphones (or a in-ear headphones) to the balanced
line-out port (2.5mm).
2. Connect the receiver to the balanced audio port and check the icon status in the upperright
corner of the screen. (
)
* The status icon in the upper-right corner of the screen will change when a receiver is
connected to the unbalanced audio port. (
)
* Balanced and unbalanced output cannot be generated at the same time.
* When you connect a Bluetooth receiver, the icon will be outputted at the top.
* Some non-standard 2.5 mm 4-pole earphones may not be compatible.
CONNECTING TO BALANCED AUDIO PORT
Basic Use
Pin Arrangement of
Balanced Audio Port
(2.5mm 4-pole)
R−
R+
L+
L−