User manual

CONNECTING AND DISCONNECTING FROM THE PC

Basic Use

1. Use the USB cable to connect PLENUE D3 to your PC.

2. Press and hold the

button to turn on the product.

3. The connection image appears on the PLENUE D3 screen.

4. Also make sure to check My Computer or Windows Explorer to see if

PLENUE D3 is properly connected to the PC.

5. Use PLENUE D3 to copy the track you wish to listen to.

6. When done, click the icon on the system tray to safely remove

PLENUE D3 from the PC.

7. Click the popup message.

8. Make sure that PLENUE D3 has been safely disconnected, then

remove it from the PC.

- The maximum number of ﬁles and folders that can be

recognized by the product.

Built-in : 8,000 ﬁles + 4,000 folders

microSD : 16,000 ﬁles + 8,000 folders

- Disconnect the product after performing

‘

Safely remove

hardware

’

function.

- The following message may appear randomly, but it does not

indicate that the product is malfunctioning. Please try again.

- If your operating system does not display the

‘

Safe To Remove

Hardware

’

window, disconnect the player after all transfer

operations are completed.

- Only simple ﬁle transfer operation is available for Linux and Mac OS.