User manual

26
COWON AQ2
+ Setting Auto Shutdown Voltage
When battery voltage falls below the pre-set voltage value after going into parking mode recording, power is turned off
automatically to protect the battery. Shutdown voltage value can be set through Smart Manager and PC Manager.
*
Go to Settings → Recording → Setting Voltage
- When standby operation time becomes shorter in parking mode recording, set the range of auto shutdown voltage lower.
- The lower the pre-set voltage value, the longer the standby time in parking mode recording, and the higher the pre-set voltage
value, the shorter the standby time in parking mode recording.
- If voltage falls below the pre-set auto shutdown voltage value during operation while auto shutdown timer is set, power is
turned off regardless of the auto shutdown timer.
- If you do not wish to use the auto termination voltage setting feature, then go to Settings → Record Setting → Parking
Recording and turn off Termination Voltage.
- If the auto termination voltage setting feature is not in use, then the vehicle battery may be discharged. This may result in
a faulty ignition start or engine stop. It is recommended to only use this feature when absolutely necessary.
*
Parking mode recording, auto parking mode voltage, and auto shutdown voltage settings are accessible only during
uninterruptible power connection.
*
The lower the pre-set auto shutdown voltage value, the greater the risk of battery discharge; the higher the pre-set auto
shutdown voltage value, the more effective it is for preventing battery discharge. Set the voltage value to suit your vehicle
battery condition before use.
Other Functions