User manual

25
COWON AQ2
+ Setting Parking Mode Voltage
Parking mode voltage can be set through the Smart Manager and the PC Manager.
*
Go to Settings → Recording → Set voltage
- Set the voltage value lower if the device goes into parking mode recording while driving.
- Set the voltage value higher if the device does not automatically go into parking mode recording while parked.
- If the output voltage of vehicle battery is higher or lower than the parking voltage setting range, then go to Settings → Record
Setting → Parking Recording and turn off Use Parking Voltage. Afterward, the device detects the movement of the vehicle to
start the parking recording.
+ Auto Shutdown Timer
After parking recording commences, the device operates for a pre-set time, after which the power is turned off
automatically. Auto Shutdown Timer can be set through the Smart Manager and the PC Manager.
*
Go to Settings → Recording → Auto Shutdown Timer
+ Front and Rear View Recording Synchronization
In the ordinary recording status, the front and rear view cameras are synchronized by the front view camera setting. If
one of the cameras stops recording due to high temperature protection or safe removal of memory card, then the other
camera autonomously runs by its own setting.
- Items like file name, recording file save cycle, parking voltage, and termination voltage are determined by the front view
camera setting.
- Wi-Fi On/Off, Remote Monitoring On/Off, and Sound Recording by Button On/Off are always applied to both the front and
rear View cameras.
Other Functions