User manual

COWON AQ2

Before You Start

+ Installation

Example: 1-channel front camera installation. Install the rear camera in the same manner for a 2-channel installation.

1. Insert the memory card into the device.

2. Place the AQ2 in the device holder.

Remove the release paper from one side of the double-

coated tape.

1) The 2-channel package includes two 1-channel install packages, a

camera connection cable, rear mount holder, and double-coated tape.

2) If you forcibly insert the card in a wrong direction, it is likely to cause

damage or failure. Note that you may need to receive paid repair service

to fix this.

4. Attach the side that removes release paper onto the holder

and remove the release paper on the other side.

Choose the location where you want to attach the device to

the vehicle. Wipe any foreign matter or moisture completely

from the location before installing the device.

3) 4)

6. Connect cigar jack cable.

3) A space behind the rearview mirror is recommended for installation.

4) Select a location carefully as repositioning the device after removing may

weaken adhesiveness significantly. Double-check the chosen location

before fixing the device.