User manual

16
..........
COWON AN2
Before You Start
+ Connecting Uninterruptible Power Cable
When connected with uninterruptible power cable, recording continues even when the
vehicle is parked and the engine is turned off.
+ Make sure you fully understand how to set up uninterruptible power connection before connecting the
device.
+ Each wire must be fixed to a specific dedicated location, otherwise inverse voltage can occur, seriously
damaging the device.
Black Wire (GND)
+ Fix it to a bolt attached to the metal of the
vehicle's body.
Red Wire (ACC)
+ Connect it to the ACC(cigarette
lighter, etc.) fuse of the vehicle's
fuse box.
Yellow Wire (BATT+)
+ Connect it to the uninterrupted power
fuse of the vehicle's fuse box. (hazard
flasher, dome light, taillight, etc.)
+ Uninterruptible power cable must be installed using wires from the fuse box inside the car.
*
Uninterruptible power cable may be purchased separately.