User manual

COWON AN2
..........
15
Before You Start
+ Installation
+ A space behind the rearview mirror is recommended for installation.
+ Select a location carefully as repositioning the device after removing may weaken adhesiveness significantly. Double-check
the chosen location before fixing the device.
+ Adjust the camera lens so that about 10-20% of your vehicle's hood appears on the recording screen.
Insert the memory card into
the device.
Place the AN2 in the device
holder.
Remove the release paper from
one side of the double-coated
tape.
Attach the side that removes
release paper onto the holder
and remove the release paper
on the other side.
Choose the location where you
want to attach the device to
the vehicle. Wipe any foreign
matter or moisture completely
from the location before installing
the device.
Adjust the direction of the
camera lens.
>
>
>
>
STEP 1
STEP 4
STEP 2
STEP 5
STEP 3
STEP 6
Select a
location
and install
Use a coin to fasten the bolt on the
hold to fix the product in place
TIP!