Bluetooth Speaker Brand Name:COWIN Model name: Nanobeat true wireless FCC ID: GFO-NANOBEAT
5 Truewireless operation 5 8 8 9 9 12W Truewireless Response: 12W
Truewireless stereo
V+/B/V-
Truewireless operation Single speaker connection instruction (1) Slide “ON/OFF/BT” switch to BT, you will hear the power-on indicating sound and quick beeps. Please ignore the later beeps.Press and hold until you hear ticks, then your speaker is ready for paring. (2) .
(5). If your smart phone shows the device is connected, but no sound when you play music or you can’t dial a phone number when you long press , turn the smart phone Bluetooth off and turn on again, choose “True wireless stereo” record², reconnecting by hand hearing an indicating sound and your phone shows the device is connected. connection succeeded, then play music or dial the call. B.
and press again, you can end the call. (4). If your smart phone shows the device is connected, but no sound when you play music or you can’t dial a phone number when you long press , turn the smart phone Bluetooth off and turn on again, press “True wireless stereo” record, reconnecting by hand hearing a sound indicating connection succeeded, then play music or dial the call. B.
Note 3: Iphone can connect with two bluetooth speakers at the same time.So the phone can not pair with any other speakers when it has connected with a pair of true wireless speakers,the sound will be intermittent Note 4: If you slide “ON/OFF/BT” to “ON”, Bluetooth is still on and ready for pairing.If the speaker connect to your phone automatically,it can pause/play, next/previous ,but there will be no sound.So you have to use a USB cable to connect the speaker and play music.
Open bluetooth Into pairing mode 8
9
Important Regulatory Information This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
