Bluetooth headphone Brand Name: Cowin Model Name: E-1 FCC ID : GFOE-1
Contents 1. Introduction 2 2. Battery Precautions 3 3. Getting Started 4 4. Installation 5 5. Cable Connection 6 6. Bluetooth Connection 6 7. Function Guidance 7 8. Turn off the device 8 9. Battery Charging 8 10. Product Care 9 Please read the following safety warnings and precautions before using your device.
1. Introduction Thank you for purchasing our bluetooth headphone: E-1. This device can be easily connected with smartphone, tablet PC and other devices via bluetooth or audio cable during your traveling and daily usage. It brings you an easy lifestyle. Specification E-1 Load impedance: 32Ω S/N: >85dB Frequency range: 20Hz-20KHz Power supply: Lithium battery Audio source: iPhone, iPad, Smartphone, Notebook, MP3, MP4, etc Function spec: Bluetooth, Microphone, Line-in Size: 197.5mm x 169.
2. Battery Precautions The device can be powered by a built-in rechargeable lithium battery. Please charge the battery for at least 8 hours before your first use of device. If the device is not used for a long period of time, the battery may be out of power. Please charge the battery. Rechargeable batteries are only to be charged under adult supervision. Use only the supplied AC adapter to 3.5mm DC Plug cable to recharge the battery. Improper charging may damage the battery and the device.
3.
4. Installation Put this headphone on, it can be adjusted to fit personally by twisting the left and right ear muffs. You can adjust the length so that the headphone will fit comfortably on your head and ears.
5. Cable Connection USB Audio Cable for audio 6. Bluetooth Connection 1. Switch the button of right ear muff up to turn on the device, you will hear two long “dudu” sound after one beep sound. At this moment, the device is in pairing mode and can be searched. 2. Active the Bluetooth function of your smartphone or computer, follow the instructions of them.
menu” on your device. Select the option “discover” or “add a bluetooth device”. You will find this headphone under the name “Bluetooth”. Pair this headphone by pressing “Yes” or “OK” on your device. If necessary, please use passkey or PIN=0000(4 zero) to finish the pairing process. Your device will confirm when pairing is complete. In case of unsuccessful pairing, switch the button down and restart it. 3.
Make a call When you make a call from your mobile phone the call will (subject to phone settings) automatically transfer to your headphone. Answer /end a call Press “ ” (the middle button)to answer or end a call. 8. Turn off the device Switch the right button down, the headphone will be turned off. 9. Battery Charging The device has a built-in rechargeable battery. This can be charged by USB cable connected with your computer.
10. Product care Your device is designed to be light, compact and durable. As an electronic device and must be treated carefully. Putting unnecessary pressure on it or striking the device against other objects can cause damage. To avoid damage to your device, please Do not drop, crush, bend or apply excessive force to the device. Do not expose your device to moisture, extreme or prolonged heat, cold, humidity, or other adverse conditions. Avoid storing it in damp, humid or wet places. It is not waterproof.
Important Regulatory Information This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
