Product Manual

Printing
N-560 Operator’s Manual 57
Trend Data Printout
The format of data displayed when a trend printout is requested is
the same as the real-time data. The only differences are that
“TREND” is displayed in the top row instead of the “CRC: XXXX”
software verification number and there is no “Status” column.
Readings are displayed in 4-second
intervals. The values on each row
are an average for the 4-second period.
At the end of the printout, an “Output Complete” line indicates that
the trans
mission was successful. If the “Output Complete” line is not
present, a corruption of the data may have been detected and the
data should be ignored.
Figure 5: Trend Data Printout
Once a trend printout has begun, the N-560 must be turned off and
back on again before a new trend printout can begin.