Product Manual

Using the N-560
38
Note:The possible settings for SatSeconds are Off, 10, 25, 50, and
100 seconds.
2. Press the Adjust Up button or Adjust Down button to select the
desired SatSeconds setting.
Setting the Data Port Baud Rate
Discussion
The baud rate determines the speed at which the N-560 sends data
to the attached equipment (printer or computer). The baud rate is
determined by the capabilities of the attached equipment.
Procedure
With the N-560 in the normal monitoring mode:
1.
Simultaneously, press the SpO2 Alarm Limit button and Pulse
Rate Alarm Limit
button for 3 seconds. Menu option 1 will be
displayed.