Product Manual

Using the N-560
N-560 Operator’s Manual 27
• Use forehead, nasal, or ear sensor (adult patients only)
•Use O
XIMAX adhesive sensor
• Secure cable
• Secure with headband (M
AX-FAST)
• Remove nail polish
• Loosen sensor (too tight)
• Isolate external interference (electrosurgical device, cell
phone)
• Clean site (MAX-R)
Setting the Pulse Beep Volume
WARNING: Use only Nellcor-approved sensors and sensor
cables.
1. Connect a DOC-10 pulse oximetry cable to the SpO2 Sensor Port
(1) on the front of the N-560.
2. Connect an SpO
2 Sensor to the other end of the DOC-10 pulse
oximetry cable.
1. SpO2 Sensor Port