Product Manual

Using the N-560
N-560 Operator’s Manual 25
Sensor Attached
The Pulse Search indicator and the Sensor Off indicator light and the
N-560 displays dashes in the %SpO
2 and Pulse Rate displays while
the N-560 is searching for a valid pulse.
When a valid pulse is detected, the N-560 enters the Monitoring
Mode and displays patient parameters. Look for movement of the
blip bar and, if the pulse beep volume is not 0, listen for pulse beeps
to verify that displayed measurement values are current and accurate.
1. Sensor Off Indicator 2. Pulse Search Indicator