Product Manual

Setting up the N-560
N-560 Operator’s Manual 17
Connecting the N-560 to AC Power
1. Plug the female connector of the power cord into the N-560
AC power connector (1).
2. Plug the male connector of the power cord into a properly
grounded AC outlet.
3.
Verify that the AC Power Indicator is lit.
Connecting a Sensor to the N-560
WARNING: Use only the DOC-10 pulse oximetry cable with the
N-560. Use of another sensor cable will have an adverse effect
on p
erformance. Do not attach any cable that is intended for
computer use to the sensor port. Do not connect any device
other than a Nellcor-approved sensor to the sensor connector.
1. Power Connector