Instruction Manual
Table Of Contents
- 1 Camera Overview
- 2 Quick start guides
- 2.1 Installing the batteries
- 2.2 Installing the SD card
- 2.3 Insert the SIM card
- 2.4 Downloading the Mobile App
- 2.5 Power switch and buttons
- 2.6 Setting map
- 3 Connecting CAM to cloud server
- 3.1 Connecting CAM to cloud server
- 3.2 Sending a Test Photo to the Cloud Server
- 3.3 Setting CAM with Web Portal or APP
- 3.4 Other basic operation via APP
- 4 Auxiliary power
- 5Mount tips
- AppendixⅠ: Technical Specifications
- Appendix Ⅱ: Parts List
Page
3
2 Quick start guides
2.1 Installing the batteries
This camera can operate on 12AA batteries.
Note:
·Do not mix different types of batteries
·Do not mix the old and new batteries
·We recommend high-density and
high-performance batteries, such as Alkaline or
Lithium batteries.
·Remove batteries when not in use to prevent
leakage!
2.2 Installing the SD card
To enable power to the camera, you will need to install
a SD card in the slot located at the bottom right side of
the camera. You can use any SD card sized up to 256GB.
Please make sure to enter MENU->SYS->Format SD to format
the SD card before use.
2.3 Insert the SIM card
Insert the SIM Card in the slot located at the upper
right side of the camera.