Technical data

Distribution Unit

138--118

DISTRIBUTION

UNIT

3647.DOC010302Edition: Sept. 05, 2005

DIP--

switch

Step Display Function Push but-

ton B23

(left)

Push but-

ton B22

(right)

1+2+3 1 Chn1 Output channels 1--8 data selection choose

2 HSEr Select for heading serial (LED red) choose set

3 nME1 Select for NMEA, 1/sec (LED green) choose set

4 nME2 Select for NMEA, 10/sec (LED blue) choose set

5 Chn2 choose

6 HSEr Select for heading serial (LED red) choose set

7 nME1 Select for NMEA, 1/sec (LED green) choose set

8 nME2 Select for NMEA, 10/sec (LED blue) choose set

9 Chn3 choose

10 HSEr Select for heading serial (LED red) choose set

11 nME1 Select for NMEA, 1/sec (LED green) choose set

12 nME2 Select for NMEA, 10/sec (LED blue) choose set

13...... CHn4....12 choose

Same procedure than for channels above

3 1 -- r o -- RoT output scaling choose

2 r30 Select for 30°/minute choose set

3 r100 Select for 100°/minute choose set

4 r300 Select for 300°/minute choose set

5 Gy Select for analog heading output choose set