Technical data

Distribution Unit
138--118
DISTRIBUTION
UNIT
45
3647.DOC010302Edition: Sept. 05, 2005
4.2.3.5 Adjustment of NMEA Formats (E10)
The Distribution Unit can provide for each output one of three
different data f ormats (Course bus, NMEA1 and NMEA2).
Selected format can be recognized by the respective
LED colour.
The content of the course bus format cannot be changed, but
both NMEA formats can be adjusted concerning to telegram--
type and repetition rate.
Procedure for NMEA1:
OPEN
DIP--Schalter B20
B23 B22
Fig.26: DIP--Switch position to adjust the NMEA1 interface
-- Switch 1 of the DIP--Switch into the upper position.
Number of oper-
ations of push button
B23
Display Baudrate Interface
after s witching switch 1
(B20) into the upper
position
nME1 NMEA Channel 1
1x CY. 1 4800Bd NMEA 1.0sec
2x CY.10 4800Bd NMEA 0.1sec
3x cY.10 9600Bd NMEA 0.1sec
4x CY.50 38,4kBd NMEA 0.02sec
5x EHdT HEHDT--Telegram
6x CHdT HCHDT--Telegram
7x IHdG HCHDG--Telegram
8x IroT TIROT--Telegram*
9x EroT HEROT--Telegram*
* to adjust the turn rate, see section 4.2.3.7