Technical data

Distribution Unit
138--118
24
3647.DOC010302 Edition: Sept. 05, 2005
2.2 Installation
The distribution unit has to be mounted according to the dimensional drawing
138--118.HP005.
The front cover should be removable.
Please note the comment depending the internal protection at the dimensional drawing.
2.2.1 Installation of the options
For installations of the options, as there are “Additional Output Box” and “AC/DC--Con-
verter”, see service manual of the Compass STD 22 Compact.
NOTE: While connecting the AC/DC--Converter one cable inlet between “AC IN” and
“DC OUT” must not be used
DC Out
AC In
One cable inlet must not be used be-
tween “DC out” and “AC In” !!!
Fig.14: Connection at the AC/DC--Converter