Technical data

Distribution Unit

138--118

DISTRIBUTION

UNIT

3647.DOC010302Edition: Nov. 28, 2005

CONTENTS Page

DeclarationofConformity ................................................

1 General 1...............................................................

1.1 CAN--Bus 2.............................................................

1.2 Technical Data 3.........................................................

1.2.1 Mechanical Data 3.......................................................

1.2.2 Electrical Data 3.........................................................

1.3 Information about LED‘s, push buttons, switches, plugs and connectors

of the integrated PCB‘s 4.................................................

1.3.1 Interface PCB and I/O PCB 4.............................................

1.3.2 Terminal Board, Interface PCB and I/O PCB (E10) 10..........................

2 Installation of the Distribution Unit 20........................................

2.1 General remarks 20.......................................................

2.1.1 General information about establishing an earth connection 23.................

2.2 Installation 24............................................................

2.2.1 Installation of the options 24................................................

2.3 Connections 26...........................................................

2.3.1 Connection of the options 28...............................................

2.3.2 RS422 -- Interface or NMEA Interface of Heading Receiver 27..................

2.3.3 Connection of DV--bus 29..................................................

3 Switching On the Distribution Unit 30........................................

4 Setting of Jumpers and Adjusting the DIP--Switches 31........................

4.1 Setting of Jumpers 31.....................................................

4.1.1 Activation the termination resistors by switches (E10) 32.......................

4.2 Setting of DIP--Switches 34................................................

4.2.1 Setting of DIP--Switches for DV--bus application 34............................

4.2.2 Setting of DIP--Switches for CAN --bus 35....................................

4.2.3 General information in use of the DIP--Switch and push buttons 36..............

4.2.3.1 Setting of DV--bus address 36..............................................

4.2.3.2 Setting of CAN Bus address 37.............................................

4.2.3.3 Adjustment of the 8 output channels (12 output channels --> E10) 39............

4.2.3.4 Adjustment of NMEA Formats 41...........................................

4.2.3.5 Adjustment of NMEA Formats (E10) 45......................................

4.2.3.6 Left blank 49.............................................................

4.2.3.7 Scaling of RoT Output 50..................................................

4.2.3.8 Selection of magnetic compass 51..........................................

4.2.3.9 Displaying heading or speed information 52..................................

5 Switching OFF the Distribution Unit 53.......................................

6 Adjustments 54...........................................................