Technical data

Distribution Unit
138--118
DISTRIBUTION
UNIT
13
3647.DOC010302Edition: Sept. 05, 2005
see
see Fig.9 see Fig.10
see Fig.7
1
2
3
4
5
6
789
10 11
12
13
14
15
Fig.8
Fig.6: I/O PCB (138--118.101. E10)
No.
Designation at the
I/O PCB E10
Remark
Fig.6/1 Switch B41 Test purpose only. Has to be always in closed
position.
Fig.6/2 Plug B2 TMC Connection IN/OUT
Fig.6/3 Plug B1 Connection to the Interface PCB
Fig.6/4 LED H38 35V DC for Step--function, lights up if present
Fig.6/5 Plug B10 Supply voltage 24V DC for the I/O PCB
Fig.6/6 Plug B4 Connection to flash
Fig.6/7,8,
9,10,11
LEDs
H42,H40,H41,H44,H43
Lights up if operating voltages + 5V DC and
+/-- 15V DC are present.
Fig.6/12 Push button B40 ResetCPU,afterflashing
Fig.6/13 LED H1 Processor clock, blinks green
Fig.6/14 Switch B36 Not used, for future purpose
Fig.6/15 LED H50 Lights up red if the 35V DC for the Step--function
are switched off.