Technical data

Distribution Unit

138--118

3647.DOC010302 Edition: Sept. 05, 2005

No. Designation at the I/O PCB Remark

Fig.3/21 Plug B28 Output Channel 6 with 3 LED‘s

blue = NMEA 2

green = NMEA 1

red = Course bus

Fig.3/22 Plug B27 Output Channel 5 with 3 LED‘s

blue = NMEA 2

green = NMEA 1

red = Course bus

Fig.3/23 Fuse E8, 1A T Protection for Channel 8

Fig.3/24 Fuse E7, 1A T Protection for Channel 7

Fig.3/25 Fuse E6, 1A T Protection for Channel 6

Fig.3/26 Fuse E5, 1A T Protection for Channel 5

Fig.3/27 Plug B3 +24V DC supply voltage for

repeaters

Fig.3/28 Plug B5 RoT--Output +/--10VDC

Fig.3/29 Plug B6 Plug for connection Printer

(RS232C Interface)

Fig.3/30 Plug B7 Step--output 1

Fig.3/31 Plug B8 Step--output 2

Fig.3/32 Plug B9 Step--output 3

Fig.3/33 LED H49 Indication Step--Interface 1

Fig.3/34 LED H48 Indication Step--Interface 2

Fig.3/35 LED H47 Indication Step--Interface 3

Fig.3/36 Fuse E9, 0.25A T Protection for Step--output 1

Fig.3/37 Fuse E10, 0.25A T Protection for Step--output 2

Fig.3/38 Fuse E11, 0.25A T Protection for Step--output 3

Fig.3/39 Plug B20 with LED H11 Status--Signal with indication

“GPS COMPASS SELECTED”

Fig.3/40 Plug B17 with LED H8 Status--Signal with indication

“SENSOR DIFF. ALARM”

Fig.3/41 Plug B14 with LED H5 Status--Signal with indication

“SENSORALARM G3/GPS”

Fig.3/42 Plug B11 with LED H2 Status--Signal with indication

“SYSTEMALARM”

Fig.3/43 Plug B21 with LED H12 Status--Signal with indication

“CAN DISTURBED”

Fig.3/44 Plug B18 with LED H9 Status--Signal with indication

“TMC SELECTED”

Fig.3/45 Plug B15 with LED H6 Status--Signal with indication

“SENSORALARM TMC”