Technical data

Distribution Unit
138--118
DISTRIBUTION
UNIT
7
3647.DOC010302Edition: Sept. 05, 2005
No. Designation at the I/O PCB Remark
Fig.3/1 Connector B1 Connection to the Interface PCB
Fig.3/2 LED H30 35V DC Voltage (Step)
Fig.3/3 Push Button B40 Processor Reset
Fig.3/4 LED +5V5 +5VDC for RoT--Conversion
Fig.3/5 LED +5V4 +5VDC galvanically separated
supply voltage
Fig.3/6 LED +5V6 +5VDC for RS232C Interface
(Printer)
Fig.3/7 LED --15V RoT Supply voltage
Fig.3/8 LED +15V RoT Supply Voltage
Fig.3/9 LED H1 Processor Clock
Fig.3/10 LED H50 Relays ON/OFF Step--Supply
Fig.3/11 Plug B26 Output Channel 4 with 3 LED‘s
blue = NMEA 2
green = NMEA 1
red = Course bus
Fig.3/12 Plug B25 Output Channel 3 with 3 LED‘s
blue = NMEA 2
green = NMEA 1
red = Course bus
Fig.3/13 Plug B24 Output Channel 2 with 3 LED‘s
blue = NMEA 2
green = NMEA 1
red = Course bus
Fig.3/14 Plug B23 Output Channel 1 with 3 LED‘s
blue = NMEA 2
green = NMEA 1
red = Course bus
Fig.3/15 Fuse E4, 1A T Protection for Channel 4
Fig.3/16 Fuse E3, 1A T Protection for Channel 3
Fig.3/17 Fuse E2, 1A T Protection for Channel 2
Fig.3/18 Fuse E1, 1A T Protection for Channel 1
Fig.3/19 Plug B30 Output Channel 8 with 3 LED‘s
blue = NMEA 2
green = NMEA 1
red = Course bus
Fig.3/20 Plug B29 Output Channel 7 with 3 LED‘s
blue = NMEA 2
green = NMEA 1
red = Course bus