User guide

This series of screens is what you use to set operating parameters for the KSC52 (if you wish to change them).
When you start this application, the System Option Setting screen shown above displays first. You can click on
the other tabs (Operation Password Setting, ID Setting, or Date/Time Setting to bring up their corresponding
options windows. Most of the time you will not need to use this; the KSC52 defaults to automatic time/date
update (from the PC), 640x480 resolution, and Remote Control enabled. Browse through the screens and their
options; this is self-explanatory. Don’t set up a password unless you really need to and if you do, make sure you
remember it; write it down. If you forget it, it’s not straightforward to reset. If you ever use the software reset as
in Section 3(D) above, you m
at need to reset some of these options if you had changed them from the default
settings.
4. Using the Remote Control
KSC-52 Micro DVR 8 User Guide v1.3
You don’t actually need the Remote Control unit to use the KSC52 for its basic video recording function; you
can put the KSC52 in your shirt pocket, then reach up and slide the Power switch on/off through the shirt fabric
and it works just fine. For the Beat Officer on patrol, this is typical because carrying around the (small) remote
control, or trying to access it in a pinch, isn’t very practical.