Specifications

Capable of interface with 4-wire matrix
intercoms, 2-wire intercoms, telephone interfaces
or connection of multiple base stations, the DX200
is a flexible system for many applications. Each
DX200 base station supports up to 15 users, using
any combination of BP200 belt packs and choice
of headset, as well as WH200 wireless “all-in-one”
headsets. Wired intercom ports support Bosch
Telex RTS, ClearCom and other brands two-wire
and 4-wire matrix intercoms. Interface system to
telephone with additional components. Increase
number of talkers or expand coverage area by
linking multiple base stations together.
DX210’s base station has the same footprint and
features as DX200 base but adding dual (two)
channel operation when used with BP210 belt
packs with headset or WH210 wireless “all-in-
one” headsets. BP200 belt packs with headset
and WH200 wireless “all-in-one” headsets may be
mixed and matched with BP210 and WH210 units.
The DX210 supports two separate two-wire and
four-wire matrix channel interfaces. Like DX300,
DX210 supports 4 talkers in single channel and 3
talkers in dual channel modes.
BP300 Wireless belt pack
(pouch not shown)
BP200/BP210 (not shown)
looks same except for controls
WH300 Wireless All-in-One Headset
WS200/WS210 (not shown)
Looks same except for controls
HS15
HS15D
HS16
MD-XLR
Pigtail adapter for Dynamic
mic intercom headsets with
XLR4 male or female
connector (specify).
Headset
Extension Cable
(7 foot)
SP10
Base Station Monitor
Speaker DX200
HS4-3 Earpiece &
Lapel Microphone
Antenna
Splitter
AC40A
4-slot battery
rapid charger
BAT41
Rechargeable Lithium-ion
battery pack
Belt Pack Pouch
Included with each BP200
and BP300 Belt Pack
Travel Case
For DX300/ES
Cell phone 2.5 mm
headset interface
adapter
CH-21
CH-13
CH-11
KLSA
T-20
TM
Subscriber Specifications
Transmit power: 100 mW burst
Antenna: Internal
Mic input: Electret (except WH200/
210/300)
Headset connector: Mini-DIN (except WH200/
210/300)
Headset output: 160 mW into 32 ohms
Power requirements: BAT41 battery, 50-60 Mz or
12-14 VDC, or 6 AA batteries
Battery life: Hands-free Up to 14 hrs, PTT
up to 20 hrs. with BAT41
FCC acceptance: Part 15 (no license required)
Tactical Wireless Systems , cont.
The compact DX100 wireless headset system
supports up to 4 simultaneous headset talkers
and up to 15 listening users, like all our base
station systems.
With simplicity and economy in mind the DX base has no
connections for expansion or interface. System is perfect for
applications where there is no expansion in the number of “talkers” or interfacing with
other systems is anticipated. The DX100 wireless headset intercom system features a
compact economical base station which is sealed for dust and moisture. Powered by 120
V AC or 12 VDC but also has 6 “AA” batteries for backup power. Supports up to 15 users
and 4 “talkers” using any combination of BP200 belt packs with headset choice, and/or
WH200 wireless “all-in-one” headsets. Two BAT41 li-ion battery packs are included with
each headset unit.
CH-16
ANT-874
Optional Trident
multi-polarized
antenna for non-line
of sight
8
9
The DX200 19-
inch rack mount
base system
offers the most
expansion and
interface options.
Most Cobalt headsets can be
provided for use with DX-series
belt packs. Note: Headset PTT
switch is non-functional when
used with a Belt Pack.
DX210
System Specifications
RF frequency range: All band 2400-2383.5 MHz,
low band 2401.9-2439.9 MHz,
high band 2443.4-2481.4 MHz
Frequency response: 200 Hz-3.5 kHz
Distortion: <2%
RF sensitivity: -90 dBm with 10-3 BER
Temperature range: -4 to 131°F (-20 to 55° C) Typ.
Transmit/Receive type: Frequency-hopping spread
spectrum
<2%. -90dBm with 10-3 BER
  -4to131˚F(-20to55˚C)Typ
spectrum (FHSS)
Modulation type: Gaussian filtered FSK, TDMA
Encryption: 64-bit RoHS compliant
Base Station Specifications
Transmit power: 100 mW burst
TX & RX antenna: dipole
Mic input: Electret (not applicable on
DX100)
Headset connector Mini-DIN (DX200, DX300/ES)
Power requirements: 100 mW burst 1/2-wave, dual
diversity
100- 240 VAC, 50-60 Mhz or12-
14 VDC on all models, plus
6AA (DX100 and DX300/ES
FCC acceptance: Part 15 (no license required