Instruction manual

22
ALL RESET MODE
At some point in time, you may desire to reset the transceiver
settings to their default values. This function will reset all
channelstotheirdefaultfrequenciesandQT/DQT,theVOX
functiontoitsdefaultstatus,andallkeystotheirdefault
functions.
To reset the transceiver:
1 With the transceiver power OFF, press and hold the PTT
switch, the Upkey,andtheDownkeywhileturningthe
transceiver power ON.
• Continuetoholdthekeysfor2seconds,untiltheLEDindicator
lights yellow.
2 Releasethekeys.
• Thetransceiverannounces“Conrm”andreturnstonormal
operation.
• IfthekeysarereleasedbeforetheLEDindicatorlightsyellow,
All Reset mode will cancel.