Instruction manual

5
4 Insert the connector of the new
batterypackintothePCBterminalby
pressing down on it.
• Matchthedirectionoftheconnector
and insert it vertically.
5 Pullbackthebatterypacklatch,then
insertthebatterypackintoposition.
• Failuretopullbackthebatterypack
latchwillcausethebatterypacktobe
misaligned.
6 Replace the battery cover over the
batterypack.
• Ensurethatthebatterypacklatch
locksthecoverinplace.
Red cable
(right side)