Instruction manual

4
REPLACING THE BATTERY PACK
Replaceanexpiredbatterypackwithanewlypurchased
KNB-71Lbatterypack.
◆ Donotdisassemblethebatterypack.
◆ Be sure to follow local laws concerning the disposal of battery
packs.
1 Pullbackthebatterypacklatch,then
remove the battery cover from the
transceiver.
• Whenusingthebeltclip{page6},be
sure to remove it before removing the
battery cover.
2 Liftthebatterypackanditspacking
away from the transceiver.
• Liftthebatterypackcableand
remove the connector from the PCB
terminal.
3 Removetheoldbatterypackfromthe
packingandinsertthenewbattery
pack.
• Passthebatterypackcablethrough
theholeinthepacking.