Specifications

System Specifications
RF frequency range: All band 2400-2383.5 MHz,
low band 2401.9-2439.9 MHz,
high band 2443.4-2443.4-
2481.4 MHz
Frequency response: 200 Hz-3.5 kHz
Distortion: <2%
RF sensitivity: -90 dBm with 10-3 BER
Temperature range: -4 to 131°F (-20 to 55° C) Typ.
Transmit/Receive type: Frequency-hopping spread
spectrum (FHSS)
Modulation type: Gaussian filtered FSK, TDMA
Encryption: 64-bit
RoHS compliant
Subscriber Specifications
Transmit power: 100 mW burst
Antenna: Internal
Mic input: Electret (except WH200/300)
Headset connector: Mini-DIN (except WH200/300)
Headset output: 160 mW into 32 ohms
Power requirements: BAT41 battery, except WS200
speaker station 100-240 VAC,
50-60 Mz or 12-14 VDC or 6
AA batteries
Battery life: Hands-free Up to 14 hrs, PTT
up to 20 hrs. with BAT41 (not
used on WS200)
FCC acceptance: Part 15 (no license required)
Base Station Specifications
Transmit power: 100 mW burst
TX & RX antenna: 1/2-wave, dual-diversity
dipole
Mic input: Electret (DX200, DX300ES)
Headset connector Mini-DIN (DX200, DX300/ES)
Power requirements: 100-240 VAC, 50-60 Mz or 12-
14 VDC on all models, plus 6
AA (DX100 and DX300/ES),
BAT41 (DX121)
FCC acceptance: Part 15 (no license required
Tactical Wireless, cont.
The compact DX100 wireless headset system
supports up to 4 simultaneous headset talkers
and up to 15 listening users, like all our base
station systems.
With simplicity and economy in mind the DX base
has no connections for expansion or interface.
System is perfect for applications where there is no expansion in the number of
“talkers” or interfacing with other systems is anticipated. The DX100 wireless
headset intercom system features a compact economical base station
which is sealed for dust and moisture.
Powered by 120 V AC or 12 VDC but also has
6 “AA” batteries fpr backup power. Supports
up to 15 users and 4 “talkers” using any
combination of BP200 belt pacs with headset
choice, WH200 wireless “all-in-one” headsets
or the WS200 wireless speaker station.
2 BAT41 li-ion battery packs are included
with each headset unit.
Capable of interface with four wire matrix
intercoms, 2 wire intercoms, telephone
interfaces or connection of multiple base
stations, the DX200 is a flexible system for
many applications.
Each DX200 base station supports up to
15 users, using any combination of BP200
belt pacs and choice of headset, as well
as WH200 wireless headsets or WS200
wireless speaker stations. Wired intercom
ports support Telex RTS, ClearCom and
Production Intercom two-wire intercoms.
Interface system to telephone with
additional components. Increase number of
talkers or expand coverage area by linking
multiple base stations together.
The DX200 19-
inch rack mount
base system
offers the most
expansion and
interface options.
8