Installation Manual

Figure 3
NOTE: IF YOU ARE USING A SIDE MOUNT SETUP, SKIP TO STEP 6
2. Attach the ccGG Support Legs to the ccFF Base Plate using the ccA Round Head Bolts, the ccG Washers,
and the ccN Round Head Nuts. See Fig 2.
Figure 2
3. Make sure the spa is empty and slide the Base Plate/Support Leg assembly under the center of the back of
the spa cabinet. This will be the side the spa cover will be stored behind. Ensure the ccFF Base Plate sits flat
on the ground, with no overhang off the slab or deck. See Fig 3.