UCG

coveappliance.com | 9
Dishwasher Operation
USER SETUP
The user setup feature allows the user to select prefer-
ences as listed in the chart below.
USER OPTIONS
Language Select language.
Water Hardness Adjust water hardness setting.
Connect? Turn connect on or o.*
Tone Level Adjust tone level.
Notification Turn end-of-cycle chime on or o.
Scroll Rate Adjust display scroll rate.
Display Contrast Adjust display contrast.
Display Brightness Adjust display brightness.
Floor Light Adjust status light brightness.
Rinse Aid Dosing Adjust amount of rinse aid dispensed.
Showroom Mode For showroom use only.
Reset All Restore factory settings.
*To connect to the Sub-Zero Group Owners App, connect must be
turned on.
Setting user options:
1 Touch Cancel twice.
2 Touch and hold Options for approximately 3 seconds
until “User Set Up” appears on the display.
3 Touch Options multiple times to scroll to the desired
option.
4 Touch Enter to scroll or to select the desired setting.
5 Touch Cancel to exit user setup.
WATER HARDNESS
For water softener models only, use the test strip provided
and the chart below to determine the appropriate water
hardness setting. Refer to the chart below to determine the
water hardness setting.
SETTING HARDNESS
0 (Default) 0–4 gpg
1 5–6 gpg
2 7–8 gpg
3 9–11 gpg
4 12–13 gpg
5 14–15 gpg
6 16–17 gpg
7 18–19 gpg
8 20–22 gpg
9 23–24 gpg
10 25+ gpg
Dishwasher Operation