UCG

18 | Cove Customer Care 800.222.7820
Troubleshooting
Sub-Zero, Sub-Zero & Design, Sub-Zero & Snowflake Design, Dual Refrigeration, The Living Kitchen, Great American Kitchens The Fine Art of Kitchen Design, Wolf, Wolf &
Design, Wolf Gourmet, W & Design, red colored knobs, Cove, and Cove & Design are registered trademarks and service marks of Sub-Zero Group, Inc. and its subsidiaries.
All other trademarks are property of their respective owners in the United States and other countries.
Troubleshooting
OPERATION
Dishwasher does not operate.
• Verify power is on.
• Verify electrical power to dishwasher and home circuit
breaker is on.
• Verify the child lock, Sabbath feature, and showroom
mode are not turned on.
Dishes are not clean after the wash cycle.
• Verify hot water supply.
• Verify spray arms turn freely by turning by hand.
• Verify dishes are not placed too close together and
cups and bowls are face-down and are not nested.
• Contact Cove Customer Care at 800-222-7820 for
recommendations.
Dishes are not dry after the wash cycle.
• Verify there is rinse aid in the dispenser (even if the
detergent includes rinse aid).
• Select a wash cycle other than Quick or Light, which
have limited dry time.
• Turn on Extra Dry and/or Extended Dry. Refer to Cycle
Options on page 6.
• Increase the rinse aid dosing. Refer to User Setup on
page 9.
Excess moisture on the tub at the end of the wash cycle.
• Verify there is rinse aid in the dispenser (even if the
detergent includes rinse aid).
“Check manual, Code #800140” appears on the display.
• Verify the drain is clear and free of debris.
• Verify drain line is not kinked.
“Check manual, Code #560186 or #560187” appears on
the display.
• Verify water supply is in the on position.
• Verify water supply line is not kinked.
“Call Service, Code #600148", #600149, or #600151”
appears on the display.
• Contact Cove Factory Certified Service.
SERVICE
• Maintain the quality built into your product by contact-
ing Cove Factory Certified Service. For the name of the
nearest Cove Factory Certified Service, check the Sup-
port & Service section of our website, coveappliance.
com, or call Cove Customer Care at 800-222-7820.
• When contacting service, you will need the model and
serial number of your product. Both numbers are listed
on the product rating plate. Refer to page 4 for rating
plate location.
• For warranty purposes, you will also need the date of
installation and name of your authorized Cove dealer.
This information should be recorded on page 2 of this
guide.