UCG

coveappliance.com | 17
Care Recommendations
CLEANING
Stainless steel Use a nonabrasive stainless steel cleaner and apply with a soft lint-free cloth. To bring out the natural
luster, lightly wipe surface with a water-dampened microfiber cloth followed by a dry polishing chamois.
Always follow the grain of stainless steel.
Control panel Wipe with a damp cloth.
Dishwasher racks Refer to page 12 for removal. Wipe with a damp cloth.
Interior Wipe interior, door edge, and rubber seal with a damp cloth. If necessary, spray household cleaner on
the cloth. Do not spray directly on the door. Use a dishwasher cleaner (follow the instructions on the
package) or place 1 cup of vinegar and 2 tbsp of baking soda in a container on the middle rack and run a
Heavy wash cycle.
Spray arms Refer to page 16 for removal. Place under running water and use a paper clip or similar to remove debris
from holes.
Filter Refer to page 16 for removal. Clean with soap and water. For hard-to-remove soils or calcium deposits,
use a soft brush. Do not use a wire brush or scouring pad.
Gasket Wipe with a damp cloth. Use warm soapy water and a toothbrush. If mold or mildew are present, spray
with 3% hydrogen peroxide.
Care Recommendations