Owners Manual
6
|
Cove Customer Care 800.222.7820
Dishwasher Operation
CONTROL PANEL
WASH CYCLES
Setting a wash cycle:
1 Touch the desired wash cycle or touch Cycles+
multiple times to scroll to the desired wash cycle.
2 Touch Start and close the door within 4 seconds.
NOTE: To incorporate a cycle option to the wash cycle,
touch Options before touching Start. Refer to Cycle Options.
To change the cycle after touching Start, touch Cancel.
CYCLE OPTIONS
OPTION DESCRIPTION
Delay Start Delays start of wash cycle by 1–12 hours in
1-hour increments.
High Temp Wash Increases the main wash water temperature
and extends the cycle time by 10 minutes.
Sani Rinse* Increases the rinse water temperature and
extends the rinse time.
Extended Dry Extends the dry time by 30 minutes.
Extra Dry Increases the rinse water temperature and
extends the dry time by 30 minutes.
Top Racks Only Directs wash functions to upper and middle
racks only.
*Sanitizes per NSF/ANSI standard 184 for residential dishwashers.
Control panel
DISHWASHER OPERATION
Setting cycle options:
1 Select the desired wash cycle.
2 Touch Options.
3 Touch Options multiple times to scroll through cycle
options.
4 Touch Enter to select the desired option and continue
to touch Enter until the desired setting appears on the
display.
5 Touch Options again to select additional options.
6 Touch Start and close the door within 4 seconds.
To interrupt a cycle:
1 Open the door.
2 To restart the cycle, touch Start and close the door
within 4 seconds.
To cancel a cycle:
1 Open the door.
2 Touch Cancel and follow the instructions on the display.