Owners Manual
coveappliance.com
|
17
TROUBLESHOOTING
Troubleshooting
OPERATION
Dishwasher does not operate.
• Verify power is on.
• Verify electrical power to dishwasher and home circuit
breaker is on.
• Verify the child lock, Sabbath feature, and showroom
mode are not turned on.
Dishes are not clean after wash cycle.
• Verify hot water supply.
• Verify spray arms turn freely by turning by hand.
• Verify dishes are not placed too close together and cups
and bowls are face-down and are not nested.
• Contact Cove Customer Care at 800-222-7820 for
recommendations.
“Check manual, Code #050140” appears on the display.
• Verify the drain is clear and free of debris.
• Verify drain line is not kinked.
“Check manual, Code #560186 or #560187” appears on
the display.
• Verify water supply is in the on position.
• Verify water supply line is not kinked.
“Overll Detected” appears on the display.
• Touch Cancel to reset.
• If it reappears, contact Cove Factory Certied Service.
“Check manual, Code #700197” appears on the display.
• Verify an overturned bowl or additional liquid was not
added to the load.
• Remove and clean the lters.
• Cancel and restart the cycle.
“Call Service, Code #600148", #600149, or #600151”
appears on the display.
• Contact Cove Factory Certied Service.