Installation Guide

coveappliance.com | 7
CUSTOM PANEL
Finish all sides of the custom panel. They may be visible
when the door is open.
The thickness of the custom panel can vary. A minimum
1
/2" (13) thick panel is required, but the thickness can be
increased provided the panel does not exceed 20 lb
(9 kg).
A panel less than 16 lb
(7 kg) is optimal.
The custom door panel template provided accommodates
23
3
/8" (594) and 23
3
/4" (603) wide panels. Adjust the template
accordingly for all other panel widths. Refer to the illustra-
tion below.
Door Panel
STAINLESS STEEL PANEL
Stainless steel accessory door panels are available
through an authorized Cove dealer. For local dealer infor-
mation, visit the nd a showroom section of our website,
coveappliance.com.
DOOR PANEL
TOP OF PANEL
HOLES FOR
BOTTOM BRACKET
TOP OF DOOR PANEL
HOLES FOR
TOP BRACKET
24" [610 MM] OPENING (23 3/4" [603 MM] PANEL)
23 5/8" [600 MM] OPENING (23 3/8" [594 MM] PANEL)
LEFT EDGE OF DOOR
PANEL
RIGHT EDGE OF DOOR PANEL
Custom door panel template