Installation Guide

coveappliance.com | 11
INSTALLATION
Installation
DOOR TENSION ADJUSTMENT
The door tension can be adjusted to accommodate multiple
panel weights. Panel weight cannot exceed 20 lb
(9 kg). A
panel less than 16 lb
(7 kg) is optimal. Turn the adjustment
nut clockwise to increase tension and counterclockwise to
decrease tension. Refer to the illustration below.
TENSION
ADJUSTMENT
NUT
Door tension adjustment
KICKPLATE INSTALLATION
The kickplate must be removable for service. The oor
cannot interfere with removal.
1 Finger-tighten the adjustment bracket nuts.
2 Place the kickplate on the magnets.
3 Make in-and-out adjustments. Refer to the illustration
below.
4 Remove the kickplate, then wrench-tighten the bracket
nuts.
5 Reinstall the kickplate.
IN-AND-OUT
ADJUSTMENT
BRACKET
NUTS
IN-AND-OUT
ADJUSTMENT
KICKPLATE
Kickplate adjustment