Use and Care Guide

8 | Cove Customer Care 800.222.7820

7 Verify the panel is secure against the dishwasher door,

then insert a screw into each hinge to secure the bottom

of the panel. Refer to the illustration below.

DOOR PANEL

Door Panel

CUSTOM PANEL MOUNTING

1 Remove the template from the dishwasher door.

2 Place the custom panel face down on a protected work

surface.

3 Position the template ush with the top and sides of the

panel, then mark and drill the holes.

4 Remove the custom panel mounting brackets from the

dishwasher by pushing in and up on each bracket. Refer

to the illustration below.

5 Use the screws provided to secure the brackets to the

panel.

6 Align the mounting pins on the door panel with the dish-

washer door slots, then push in and shift the panel down

to secure. Refer to the illustration below.

HINGE SCREW

Hinge screw

PANEL

MOUNTING

BRACKET

MOUNTING

Panel mounting brackets

Mounting pin