Use and Care Guide

coveappliance.com | 5
Electrical Requirements
Installation must comply with all applicable electrical codes.
Any opening into the adjacent cabinet must meet the
following: the longest dimension of the opening shall not
be more than 1
1
/2" (38). The edges of the opening must be
smooth and round.
Locate the electrical supply in an adjacent cabinet, within
reach of the power cord. Refer to the illustrations below.
A separate circuit servicing only this appliance is required.
A ground fault circuit interrupter (GFCI) outlet or breaker
may be required, whichever complies with local codes.
ELECTRICAL REQUIREMENTS
Electrical Supply 115 VAC, 60 Hz
Service 15 amp dedicated circuit
Receptacle 3-prong grounding-type
Power Cord 3'
(.9 m)
E
E
ELECTRICAL
LOCATION
IN ADJACENT
CABINET
FRONT VIEW
5
1
/2" (140)
1
1
/2"
(
38
)
2" (51)
TOE KICK
SIDE VIEW
BACK OF
OPENING
Electrical location Electrical routing
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of a malfunc-
tion or breakdown, grounding will reduce the risk of electric
shock by providing a path of least resistance for electric
current. This appliance is equipped with a cord having an
equipment-grounding conductor and a grounding plug.
The plug must be plugged into an appropriate outlet that is
installed and grounded in accordance with all local codes
and ordinances.
WARNING
Improper connection of the equipment-grounding
conductor can result in a risk of electric shock. Check
with a qualied electrician or service representative
if you are in doubt whether the appliance is properly
grounded. Do not modify the plug provided with the
appliance, if it will not t the outlet, have a proper
outlet installed by a qualied electrician.
RATING PLATE
Rating plate location
SPECIFICATIONS