Parts List/Tune Up Info

CC2642R

SWRS194G –JANUARY 2018 – REVISED APRIL 2020

www.ti.com

Submit Documentation Feedback

Product Folder Links: CC2642R

Application, Implementation, and Layout

7 Application, Implementation, and Layout

NOTE

Information in the following Applications section is not part of the TI component specification,

and TI does not warrant its accuracy or completeness. TI's customers are responsible for

determining suitability of components for their purposes. Customers should validate and test

their design implementation to confirm system functionality.

For general design guidelines and hardware configuration guidelines, refer to CC13xx/CC26xx Hardware

Configuration and PCB Design Considerations Application Report.

7.1 Reference Designs

The following reference designs should be followed closely when implementing designs using the

CC2642R device.

Special attention must be paid to RF component placement, decoupling capacitors and DCDC regulator

components, as well as ground connections for all of these.

CC26x2REM-7ID Design Files SPACER

The CC26x2REM-7ID reference design provides schematic, layout and production files for

the characterization board used for deriving the performance number found in this document.

LAUNCHXL-CC26X2R1 Design Files SPACER

The CC26X2R LaunchPad Design Files contain detailed schematics and layouts to build

application specific boards using the CC2642R device. This design applies to both the

CC2642R and CC2652R devices.

Sub-1 GHz and 2.4 GHz Antenna Kit for LaunchPad™ Development Kit and SensorTag SPACER

The antenna kit allows real-life testing to identify the optimal antenna for your application.

The antenna kit includes 16 antennas for frequencies from 169 MHz to 2.4 GHz, including:

• PCB antennas

• Helical antennas

• Chip antennas

• Dual-band antennas for 868 MHz and 915 MHz combined with 2.4 GHz

The antenna kit includes a JSC cable to connect to the Wireless MCU LaunchPad

Development Kits and SensorTags.