Parts List/Tune Up Info

16
CC2642R
SWRS194G –JANUARY 2018 – REVISED APRIL 2020 www.ti.com
Submit Documentation Feedback
Product Folder Links: CC2642R
Specifications
Copyright © 2018–2020, Texas Instruments Incorporated
Bluetooth Low Energy - Receive (RX) (continued)
When measured on the CC26x2REM-7ID reference design with T
c
=25°C,V
DDS
=3.0V,f
RF
= 2440 MHz with
DC/DC enabled unless otherwise noted. All measurements are performed at the antenna input with a combined RX and TX
path. All measurements are performed conducted.
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
Co-channel rejection
(1)
Wanted signal at –67 dBm, modulated interferer in
channel,BER = 10
–3
–7 dB
Selectivity, ±2 MHz
(1)
Wanted signal at –67 dBm, modulated interferer at ±2
MHz, Image frequency is at –2 MHz, BER = 10
–3
8/4
(2)
dB
Selectivity, ±4 MHz
(1)
Wanted signal at –67 dBm, modulated interferer at ±4
MHz, BER = 10
–3
36/36
(2)
dB
Selectivity, ±6 MHz
(1)
Wanted signal at –67 dBm, modulated interferer at ±6
MHz, BER = 10
–3
37/36
(2)
dB
Selectivity, image frequency
(1)
Wanted signal at –67 dBm, modulated interferer at image
frequency, BER = 10
–3
4dB
Selectivity, image frequency
±2 MHz
(1)
Note that Image frequency + 2 MHz is the Co-channel.
Wanted signal at –67 dBm, modulated interferer at ±2
MHz from image frequency, BER = 10
–3
–7 / 36
(2)
dB
Out-of-band blocking
(3)
30 MHz to 2000 MHz –16 dBm
Out-of-band blocking 2003 MHz to 2399 MHz –21 dBm
Out-of-band blocking 2484 MHz to 2997 MHz –15 dBm
Out-of-band blocking 3000 MHz to 12.75 GHz –12 dBm
Intermodulation
Wanted signal at 2402 MHz, –64 dBm. Two interferers at
2408 and 2414 MHz respectively, at the given power
level
–38 dBm