Parts List/Tune Up Info

14
CC2642R
SWRS194G –JANUARY 2018 – REVISED APRIL 2020 www.ti.com
Submit Documentation Feedback
Product Folder Links: CC2642R
Specifications
Copyright © 2018–2020, Texas Instruments Incorporated
(1) Numbers given as I/C dB
(2) X / Y, where X is +N MHz and Y is –N MHz
5.10 Bluetooth Low Energy - Receive (RX)
When measured on the CC26x2REM-7ID reference design with T
c
=25°C,V
DDS
=3.0V,f
RF
= 2440 MHz with
DC/DC enabled unless otherwise noted. All measurements are performed at the antenna input with a combined RX and TX
path. All measurements are performed conducted.
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
125 kbps (LE Coded)
Receiver sensitivity
Differential mode. BER = 10
–3
–105 dBm
Receiver saturation
Differential mode. BER = 10
–3
>5 dBm
Frequency error tolerance
Difference between the incoming carrier frequency and
the internally generated carrier frequency
> (–300 / 300) kHz
Data rate error tolerance
Difference between incoming data rate and the internally
generated data rate (37-byte packets)
> (–320 / 240) ppm
Data rate error tolerance
Difference between incoming data rate and the internally
generated data rate (255-byte packets)
> (–125 / 125) ppm
Co-channel rejection
(1)
Wanted signal at –79 dBm, modulated interferer in
channel, BER = 10
–3
–1.5 dB
Selectivity, ±1 MHz
(1)
Wanted signal at –79 dBm, modulated interferer at ±1
MHz, BER = 10
–3
8/4.5
(2)
dB
Selectivity, ±2 MHz
(1)
Wanted signal at –79 dBm, modulated interferer at ±2
MHz, BER = 10
–3
44/39
(2)
dB
Selectivity, ±3 MHz
(1)
Wanted signal at –79 dBm, modulated interferer at ±3
MHz, BER = 10
–3
46/44
(2)
dB
Selectivity, ±4 MHz
(1)
Wanted signal at –79 dBm, modulated interferer at ±4
MHz, BER = 10
–3
44/46
(2)
dB
Selectivity, ±6 MHz
(1)
Wanted signal at –79 dBm, modulated interferer at  ±6
MHz, BER = 10
–3
48/44
(2)
dB
Selectivity, ±7 MHz
Wanted signal at –79 dBm, modulated interferer at  ±7
MHz, BER = 10
–3
51/45
(2)
dB
Selectivity, Image frequency
(1)
Wanted signal at –79 dBm, modulated interferer at image
frequency, BER = 10
–3
39 dB
Selectivity, Image frequency ±1
MHz
(1)
Note that Image frequency + 1 MHz is the Co- channel –1
MHz. Wanted signal at –79 dBm, modulated interferer at
±1 MHz from image frequency, BER = 10
–3
4.5 / 44
(2)
dB
500 kbps (LE Coded)
Receiver sensitivity
Differential mode. BER = 10
–3
–100 dBm
Receiver saturation
Differential mode. BER = 10
–3
>5 dBm
Frequency error tolerance
Difference between the incoming carrier frequency and
the internally generated carrier frequency
> (–300 / 300) kHz
Data rate error tolerance
Difference between incoming data rate and the internally
generated data rate (37-byte packets)
> (–450 / 450) ppm
Data rate error tolerance
Difference between incoming data rate and the internally
generated data rate (255-byte packets)
> (–175 / 175) ppm
Co-channel rejection
(1)
Wanted signal at –72 dBm, modulated interferer in
channel, BER = 10
–3
–3.5 dB
Selectivity, ±1 MHz
(1)
Wanted signal at –72 dBm, modulated interferer at ±1
MHz, BER = 10
–3
8/4
(2)
dB
Selectivity, ±2 MHz
(1)
Wanted signal at –72 dBm, modulated interferer at ±2
MHz, BER = 10
–3
44/37
(2)
dB
Selectivity, ±3 MHz
(1)
Wanted signal at –72 dBm, modulated interferer at ±3
MHz, BER = 10
–3
46/46
(2)
dB
Selectivity, ±4 MHz
(1)
Wanted signal at –72 dBm, modulated interferer at ±4
MHz, BER = 10
–3
45/47
(2)
dB
Selectivity, ±6 MHz
(1)
Wanted signal at –72 dBm, modulated interferer at  ±6
MHz, BER = 10
–3
46/45
(2)
dB
Selectivity, ±7 MHz
Wanted signal at –72 dBm, modulated interferer at  ±7
MHz, BER = 10
–3
49/45
(2)
dB