Installation Guide

6 7
Add the frame
Insert the tube on the bottom of the Frame (A) into the tube on top
of the Base (E). Secure with a Bolt and Nut (J).
2
Cover the base
Place the Base Covers (F) over the Frame (A) and Base (E). Then, secure
with four Screws (M).
3
E
A
J
E
F
F
A
Build the front of the cycle
Insert the front of the Frame (A) into the Wheel (B). Secure with a Bolt
and Nut (K).
5
A
B
WAIT!
Ensure the openings on the
Frame (A) and Wheel (B)
are aligned before inserting
the Bolt and Nut (J).
NOTE: For correct placement,
make sure the screws on the
wheel are facing the back.
K
M
x4
Add the pedal arms
Insert one Pedal Arm (H) into the Frame (A). Secure with one Bolt (L).
Repeat on the other side.
4
L
H
A