Tus neeg siv phau ntawv

DP Series

QUICK DPSeries INSTALLATION AND USER’S MANUAL - REV001C

2 - Supply and equipment

2.0 - Standard supply and material included in the package

• Windlass (top+gearmotor)

• Reversing contactor box for DP1/DP2 300-500W

• Contactor box for DP2/DP3 700-1000W

• Base gasket

• Lever

• Screws for assembly, top/gearmotor

• Installation and user’s manual, Warranty

• Drilling template

2.1 - Tools required for installation

DP1

• Drill with bit: Ø 9 mm (23/64”) and Ø 11 mm (7/16”)

• Hole saw Ø 46 mm (1” 13/16) and Ø 62 mm (2” 7/16)

• Hex wrench: 13 mm

DP2

• Drill with bit: Ø 9 mm (23/64”) and Ø 11 mm (7/16”)

• Hole saw Ø 51 mm (2”) and Ø 64 mm (2” 1/2)

• Hex wrench: 13 mm

DP3

• Drill with bit: Ø 9 mm (23/64”) and Ø 16 mm (5/8”)

• Hole saw: Ø 65 mm (2”9/16) and Ø 67 mm (2”5/8)

• Hex wrench: 13 mm

2.2 - Recommended Quick

accessories not included

• Controls for control board (WCS 820 - WCS B - WCS 830)

• Waterproof push-button panel (HRC 1002)

• Foot switch (900)

• Hydraulic-magnetic circuit breaker (WCB)

•Anchor chain counter (CHC 1103 - CHC 1203 - QNC CHC)

•Control system via RRC radio (R02 - P02 - H02)

3 - Introduction

BEFORE USING THE PRODUCT, PLEASE READ THIS USER’S MANUAL CAREFULLY. IF IN DOUBT, PLEASE CONSULT YOUR QUICK® DEALER.

3.0 - Important notes

This manual features Warning and/or Caution symbols that are important for safety.

Please follow the instructions provided.

Warning symbol indicating

dangerous situations.

Caution symbol to prevent direct or

indirect damage to the product.

Thismanualprovidesboatmanufacturersandnauticalequipmentinstallerswithinstructionsonhowtoassemblethespecied

Quick®

product and operate it correctly.