DP Series REV 001C December 2022 VERTICAL WINDLASSES DP1_P 300 500 DP2_P 300 500 700 1000 DP3_P 700 1000 DP3 1500 *Other languages available by scanning the QR code on the back of this manual or on the label on the product. *EN - INSTALLATION AND USER'S MANUAL IT *Altre lingue disponibili scansionando il codice QR presente sul retro del seguente manuale o sull’etichetta alloggiata sul prodotto.
DP Series INDEX 1 - Information about the product 1.0 - Model code 1.1 - DP1 Technical Data 1.2 - DP2 Technical Data 1.3 - DP3 Technical Data 5 5 5 6 7 2 - Supply and equipment 2.0 - Standard supply and material included in the package 2.1 - Tools required for installation 2.2 - Recommended Quick® accessories not included 8 8 8 8 3 - Introduction 3.0 - Important notes 3.1 - Precautions 3.2- Precautions for the installer 8 8 9 9 4 - Installation 4.0 - Installation requirements 4.
DP Series 1 - Information about the product BEFORE USING THE WINDLASS READ THESE INSTRUCTIONS CAREFULLY. IF IN DOUBT, CONTACT YOUR NEAREST “QUICK®” DEALER. QUICK® RESERVES THE RIGHT TO MODIFY THE TECHNICAL CHARACTERISTICS OF THE EQUIPMENT AND THE CONTENTS OF THIS MANUAL WITHOUT PRIOR NOTICE. IN CASE OF DISCORDANCE OR ERRORS IN TRANSLATION BETWEEN THE TRANSLATED VERSION AND THE ORIGINAL TEXT IN THE ITALIAN LANGUAGE, REFERENCE WILL BE MADE TO THE ITALIAN TEXT. 1.
EN DP Series 1 - Information about the product 1.2 - DP2 Technical Data MODELS HI SPEED (6) DP2 P - / D MODEL POWER 300W Motor voltage 500W 12V 500W 12V 24V 12V 370 kg (815.7 lb) Maximum work load 120 kg (264.5 lb) 200 kg (440.9 lb) 220 kg (485.0 lb) 170 kg (374.8 lb) 200 kg (440.9 lb) 40 kg (88.2 lb) 65 kg (143.3 lb) 70 kg (154.3 lb) 65 kg (143.3 lb) 70 kg (154.3 lb) Work load Current consumption at work load Recovery speed at work load (2) 65 A 80 A 40 A 100 A 50 A 28.
DP Series 1 - Information about the product 1.3 - DP3 Technical Data MODELS DP3 P - / D MODEL POWER 700W Motor voltage 1000W 12V 24V Maximum instantaneous pull 12V 850 kg (1873.9 lb) 24V 1000 kg (2204.6 lb) Maximum work load 250 kg (551.1 lb) 300 kg (661.4 lb) 370 kg (815.7 lb) 450 kg (992 lb) Work load 80 kg (176.4 lb) 100 kg (220.5 lb) 120 kg (264.5 lb) 150 kg (330.7 lb) 90 A 55 A 140 A 80 A Maximum recovery speed (2) 27.4 m/min (89.9 ft/min) 26.4 m/min (86.6 ft/min) 39.
DP Series 2 - Supply and equipment EN 2.0 - Standard supply and material included in the package • Windlass (top+gearmotor) • Reversing contactor box for DP1/DP2 300-500W • Contactor box for DP2/DP3 700-1000W • Base gasket • Lever • Screws for assembly, top/gearmotor • Installation and user’s manual, Warranty • Drilling template 2.
DP Series 3 - Introduction 3.1 - Precautions Quick® windlasses are designed and manufactured to weigh the anchor. • Do not use these products for any other type of operation. • Quick® shall not be held liable for direct or indirect damage caused by improper use of the product. • The windlass is not designed to support loads generated in particular weather conditions (storm). • WEIGHING THE ANCHOR Turn on the engine • Operate the product from a position where it is possible to supervise the work area.
DP Series 4 - Installation EN B DECK LEVEL Ensure that the upper and lower surfaces of the deck are as parallel as possible. If this is not the case, compensate the difference appropriately (fig. B). A lack of parallelism could result in a loss of motor power. The deck thickness must be included among the figures listed in the table. In case of different thickness, please contact your Quick® dealer.
DP Series 4 - Installation 4.2 - Flange mounting DPSeries 700W - 1000W Flange A can be fixed on both sides of gearbox B. Mode 2 Mode 1 A A Visible QUICK Logo D Nm 3÷4,5 D Nm 3÷4,5 B 180° B C Nm 3÷4,5 Nm 3÷4,5 C QUICK Logo branded below To change from mode 1 to mode 2 unscrew screws C and D and separate the two parts A and B, turn gearbox B by 180° and reassemble it with screws C and D.
DP Series 5 - Wiring diagram EN 5.
DP Series 5 - Wiring diagram 5.
DP Series 6 - Cautions & Use EN 6.0 - Important cautions • Stay clear of chains, ropes and gypsy. • Operate the windlass from a position where it is possible to supervise the work area • Make sure the electric motor is not powered when the windlass is used manually (even when using the handle to disengage the clutch), because people with windlass remote controls (remote push-button panel or radio control) might accidentally operate it. • Secure the chain with a retainer before sailing off.
6 - Cautions & Use DP Series 6.2 - Troubleshooting If the windlass stops and the hydraulic magnetic (or thermal magnetic*) switch has not tripped, wait a few seconds and try again (avoid keeping the button pressed). If the hydraulic magnetic switch, has tripped, reset it and wait a few minutes before weighing anchor once again. If, after a number of attempts, the windlass is still blocked, we suggest to move the boat to release the anchor.
DP Series 9 - List of components DP1 EN 1 16 20 2 19 17 6 21 3 18 9 22 23 24 9 10 9 10 25 11 9 12 11 13 12 14 13 13 26 27 28 29 14 8 13 30 7 31 5 32 5 33 4 34 15 5 15 NO. NAME 14 BEARING 28 BASE DP1 ANODIZED ALUM.
DP Series 10 - List of components DP2 EN 1 2 23 25 3 26 24 27 30 4 5 9 6 31 28 29 32 7 33 34 8 10 11 12 35 13 14 13 15 36 22 22 19 18 17 38 16 37 39 20 21 20 40 41 21 NO.
DP Series 11 - List of components DP3 EN 1 2 19 3 4 20 21 5 24 22 23 6 9 27 25 28 26 7 30 29 8 31 10 32 11 12 13 14 33 13 35 35 15 36 37 34 38 17 18 39 40 17 16 41 42 43 NO.
DP Series 12 - List of motorgearbox components MOTORGEARBOX 300/500W DP1 P - DP2 P 6 5 1 10 4 11 2 9 8 3 7 POS NAME 6B MOTOR 500W 12V 1 GEARBOX FLANGE GASKET TOP TG40 6C MOTOR 500W 24V 2A GEARBOX - QUICK TG40 500W 7 FLANGE GASKET 2B GEARBOX - QUICK TG40 500W HS 8 MOTOR CASING 300/500W 3 SCREW 9 MOTOR POLE GASKET 300/500W 4 MOTORGEARBOX GASKET 10 BOTTOM COVER ELECTRIC MOTOR 300/500W 5 KEY 11 SCREW 6A MOTOR 3000W 12V MOTORGEARBOX 700/1000W DP2 P - DP3 P 7 6 13 1 11
DP Series 12 - List of motorgearbox components EN MOTORGEARBOX 1500W DP3 1 7 6 5 4 14 12 13 3 2 15 8 10 9 11 POS NAME 8 MOTOR CASING 1000/1400W 1 GEARBOX FLANGE GASKET TOP TG60 9 TERMINAL BOARD GASKET 2 WASHER 10 TERMINAL BOARD COVER 3 SELF-LOCKING NUT 11 SCREW 4 O-RING 12 SCREW 5 GEARBOX - QUICK TG70 1500W 13 BOTTOM GASKET 6 KEY 14 BOTTOM COVER 7A MOTOR 1500W 12V 15 CABLE GLAND 7A MOTOR 1500W 24V 20 QUICK DPSeries INSTALLATION AND USER’S MANUAL - REV001C
DP Series 13 - Spare parts DP1 See exploded drawing on page 16 DP1 CODE FVSSGMSDCP05000 FVSSMSE04000A00 FVSSCPBBA050A00 FVSSCFDP1000A00 FVSSB0401400A00 FVSSB0406000A00 FVSSBDP10C00A00 FVSSADP10000A00 FVSSADP100D0A00 FVSSPSCDP100A00 FVSSCPSCDP10A00 FVSSTDP1D001A00 FVSSTDP1D006A00 FVSSTDP10001A00 FVSSTDP10006A00 FVSSLVSDN0000A00 DESCRIPTION OSP DRUM BUSH DP1 OSP WINDLASS DRUM DP1 OSP GYPSY COVER DP1 OSP CLUTCH CONE KIT DP1 OSP GYPSY 1/4" DP1/E1 OSP GYPSY 6mm DP1/E1 OSP WINDLASS BASE DP1 SERIES COMP OSP SHA
EN DP Series 13 - Spare parts DP3 Refer to the exploded drawing on page 18 CODE FVSSGMSDP300000 FVSSMSE10DP3A00 FVSSTDP3D008A00 FVSSTDP3D010A00 FVSSADP300D0A00 FVSSLVSP00R2A00 FVSSCPBBA100A00 FVSSTDP30008A00 FVSSTDP30010A00 FVSSADP30000A00 FVSSCPSCDP30A00 FVSSTCDP3000A00 FVSSPSCDP300A00 FVSSBDP38516A00 FVSSBDP31038A00 FVSSCFANHC00A00 FVSSBDP310C00A00 DESCRIPTION OSP DRUM BUSH "SERIES DP3" OSP WINDLASS DRUM 1000W DP3 OSP TOP DP3 D 8MM-5/16” OSP TOP DP3 D 10MM-3/8” OSP SHAFT KIT DP3 D OSP CURVED WINDLASS
DP Series 14 - Dimensions B A C D I E L F G H DPSeries P (-/D) DP1 P 300W 500W A 75.4 (2 31/32) 84.4 (3 5/16) 84 (3 5⁄16) 99 (3 57/64) 134 (5 9/32) 140 (5 33/64) 140 (5 1/2) 166 (6 17⁄32) C 127.5 (5 1/64) 127.5 (5 1/64) 155 (6 7⁄64) D 182 (7 5/32) 196 (7 23/32) 196 (7 23/32) E 85 (3 11/32) 85 (3 11/32) F --- --- B Drum G DP2 P 300W 500W DP2 P 700W DP2 P 1000W --- DP3 P 700W 155.4 (6 1/8) --- ---340 (13 24/64) DP3 1500W 170.4 (6 45/64) 247 (9 11/16) --- 141.
DP Series REV 001C December 2022 DP1_P 300 500 DP2_P 300 500 700 1000 DP3_P 700 1000 DP3 1500 Product serial number QUICK® S.p.A. - Via Piangipane, 120/A - 48124 Piangipane (RAVENNA) - ITALY Tel. +39.0544.415061 - Fax +39.0544.415047 - www.quickitaly.com - quick@quickitaly.
