Tus neeg siv phau ntawv

- 4 -
User Manual
WARNING: ELECTRICAL SHOCK & CUT HAZARD
1. Place the blender on a clean, dry, and level surface.
2. Make sure that the control pane switch is set to 0 - OFF.
3. Plug the blender into a grounded 120V wall outlet, free of other appliances.
4. Place the ingredients into the container.*
5. Place the container onto the base, ensuring it rests securely.
6. Place the cover and filler cap on the container.
7. Move the selector switch to the desired speed.*
8. When blending is complete, set the selector switch to the 0 - OFF position.
DO NOT remove the container from the base until the unit has stopped.
Before using the blender for the first time, wash the container, cover, and cutter
assembly using the Cleaning Instructions on page 3. Do not put the cutter assembly in
the dishwasher, as the water pressure and temperature may damage components.
*See Professional Blending Techniques on page 5 for optimal blending operations.
• Failure to follow these instructions can result in broken bones, cuts,
fire, or electrical shock.
• DO NOT put hands, spoons, or other utensils into container while
blending.
• ALWAYS place cover on container before blending.
OPERATION INSTRUCTIONS
CONTROLS
• 2 - HIGH
(19,000 RPM)
• 0 - OFF
• 1 - LOW
(16,000 RPM)