Clic Softbox Octa User Guide
Clic Softbox Octa Familiarize yourself with Clic What is Clic? Clic is our most lightweight and portable range of light shaping tools, specifically designed for the A-series flashes. The Clic range gives you diverse, easy to use and compact light shapers for all your needs – on the go. How does Clic work? The Clic light shapers are mounted quick and easy due to the magnetic setup. The mount has been designed using strong magnets attaching your flash firmly to the light shaper.
Get started with your new Clic Softbox Octa
The Clic Softbox Octa is quick and easy to assemble. Unfold the Clic Softbox Octa by retracting the ring upwards until it clicks.
The Clic Softbox Octa is just as easy to disassemble when you are done. Quickly fold by pressing the unlock section.
When used on a stand, tilt the Clic Softbox Octa by pressing the trigger and rearrange the softbox according to your preference. The softbox can be tilted both forwards and backwards.
The Clic Softbox Octa is made for Profoto A-series flashes. Attach your A-series flash to the magnetic mount. Make sure that the flash is correctly inserted and have connection with all magnets and that the surface is clean.
As the Clic system uses magnetic mounts, it is important that each connection is mounted correctly.
The Clic system allows you to stack several light shapers in order to create the effect you need.
To mount different Clics with the Clic Softbox Octa, place the additional modifier from the inside of the softbox before unfolding it. This way the magnetic mount is not compromised in any way when mounting your flash to the Clic Softbox Octa. Do not place any accessories between your light and the Clic Softbox Octa.
For more information and inspiration: profoto.
