Phau Ntawv Qhia

WARNINGS

KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE

To ensure safe operation and service of the instrument, follow these instructions. Failure

to observe these warnings can result in serious personal injury, ﬁ re, or electrical shock.

• The borescope, including the camera end, is NOT insulated. Avoid probing areas where

energized conductive elements may be present. Shut off power to nearby work areas

before starting work.

• DO NOT probe moving machinery that could catch the borescope and/or camera end, and

cause harm to the operator and the Borescope.

• DO NOT use the product if it is damaged or modified. Damaged or modified batteries may

exhibit unpredictable behavior resulting in fire, explosion, or injury.

• Risk of fire and burns. DO NOT open, crush, heat above specified maximum temperature

or incinerate. Prolonged exposure to direct sunlight can result in elevated temperatures.

• DO NOT immerse in water or liquids. DO NOT use the borescope for underwater inspections.

• Properly seal the charging port cover to achieve specified water & foreign object ingress

protection. Keep seal free of dirt, oil, sand, or other material that interferes with proper

sealing. Failure to do so can result in risk of fire or electric shock.

• DO NOT open the charging port cover if wet or in a wet environment. Thoroughly dry the

unit and the seal around water-resistant cover completely before opening water resistant

cover.

• DO NOT subject to impacts or drops greater than 9.8 ft. (3m) Drops larger than this may

not show signs of damage, but internal components may have been compromised. It is

advisable to replace the unit if any such severe events occur.

• DO NOT attempt to repair the product or charging cable. There are no user-serviceable parts.

• Avoid probing areas where chemicals may be present.

• NOT intended for use on people or animals.

• DO NOT use near sources of heat.

• Keep steady footing at all times, following ladder safety procedures when necessary.