Daim Ntawv Qhia Tus Neeg Siv

Start Guide

3. Restoring and Backing up the Router Conﬁguration

If you reset the router, the current conﬁguration will be replaced by the default factory

settings. We recommend you to back up the router conﬁguration before resetting the device.

Refer to the conﬁguration manual for more information.

Once the router boots up and the PWR LED starts blinking, you can restore the default

router conﬁguration. To do so, press the reset



button on the front panel of the router for

more than 4 seconds. After you press this button, all settings are reset to the default values,

and the router will reboot.

Support

All product-related manuals, documents, and software can be found and downloaded on

the web site at

icr.advantech.cz/download address.

Hereby, Advantech Czech s.r.o. declares that the radio equipment type

ICR-2031, ICR-2431, ICR-2432, ICR-2531 and ICR-2631 is in compliance with Direc-

tive 2014/53/EU.

The full text of the EU Declaration of Conformity is available at the following internet address:

icr.advantech.cz/eudoc

QSG-0011-EN, August 4, 2021 7 Released in the Czech Republic