Tus neeg siv phau ntawv

6. Insert the new battery pack all the way into the
slot
7. Put the battery pack cover back
8. Slide the battery latch to the locked position
Cleaning and Disinfecting
During normal use of the AIM tablet the device may
become dirty and should be regularly cleaned.
Steps:
1. Turn off the AIM-78H and unplug the power
cord.
2. Wipe the screen and exterior with a soft, damp
cloth moistened only with water. Do not use liquid or
aerosol cleaners on the screen, as these will discolor the
finish and damage the screen.
3. Clean the LCD display only with a soft cloth
dampened with 60% above isopropyl alcohol or 60%
above ethyl alcohol each time after use.
Do not immerse or rinse the AIM tablet or its peripherals.
If you accidentally spill liquid on the device, disconnect
the unit from the power source. Contact your IT support
department regarding the continued safety of the unit
before placing it back in operation-Do not spray cleaning
agent on the chassis.
Do not use disinfectants that contain phenol.
Do not autoclave or clean the AIM Tablet or its
peripherals with strong aromatic, chlorinated, ketone,
ether, or ether solvents, sharp tools or abrasives. Never
immerse electrical connectors in water or other liquids.
Operating Principle
The device provides input through touch panel, hard
keys located at the bottom of it, accessories through
USB ports or its LAN/WLAN connections. The device
computes the input data with its processing unit and
then output the generated data to LCD panel,
accessories or other devices through its I/O ports or
through its LAN/WLAN connections. The device is able
to store data in its storage, and when the device is
turned off, still maintain the data in the memory units of
the storage.
Connecting the Power Cord
The AIM tablet can be powered by AC/DC power
adapter. Be sure to always handle the power cords by
holding the plug ends only.
Follow these procedures in order:
1. Connect the DC plug of the power adapter to AIM
tablet product DC in connector. (Step 1)
2. Connect the 2 pin male plug of the power cord to an
electrical outlet. (Step 2)
Intended User Profile
Age: 18 to 65
Weight: not relevant
Health: not relevant
Nationality: Global
Patient state: patient will not be the operator.
Part of the body or type of tissue applied to or interacted
with: hands and fingers, expected contact time shall
be less than 1 min.
Education level: at least 8 years intensive reading
experience (school)
Knowledge:
Minimum – read and understand “westernized Arabic”
numerals when written in Arial font
– can distinguish: every parts of body as described in
user manual
– trained and authorized by manufacturer only.
To be considered as trained and authorized, they must
complete the training course of the manufacturer; see
document number AIM-78H_User Manual_Rev 1.0 for
qualification method, when considered necessary by
the manufacturer, technician shall be called back for
retraining and annual training is also considered
necessary.
Language understanding: English, whenever other
languages are required, professional translation
company shall translate and review by the
manufacturer, see SOP document number:
SOP_Writing_Guidelines-ed.3
Experience: Mentally and physical competent, specific
medical training to understand basic knowledge for
symbols.
Permissible impairments:
– Mild reading vision impairment or vision corrected to
log MAR 0,2 (6/10 or 20/32)
– One arm / hand system capable of guiding and
Caution!
Attention!