Technical data

105104
Ød
Ød
ØD
Ød
CEILING BRACKETS to secure unit directly on the ceiling as
support if the unit cannot be placed on the wall alone.
ADJUSTABLE CEILING BRACKETS which is height-adjustable.
ROOF PENETRATION
SHEATHING
AND FITTINGS
VAPOUR BARRIER MEMBRANE used around pipes for wall
or roof ducts. Ensures tight vapour membrane after ducting.
FACADE GRILLES supplied with built-in birds net to protect
against heavy rain.
SOUND ABSORBER used if there are special requirements for
sound-proofing, e.g. in residential areas.
WALL COVER for AM 900. Used when intake and exhaust
need to be located close together and ensures against external
short circuiting.
INSULATED
PENETR ATION
DUCTING
ROOF FLASHING
PRODUCT INFORMATION
Ød ØD
AML 100 / CV 80
125 250
CV 200
160 260
AML 300 / AMP 300
200 315
AML 500 / AMP 500
250 355
AML 800 / AMP 800
AMP 900
CV 1000
315 450
AMP 1200
400 500
Ød = internal diameter ∙ ØD = external diameter
The insulated penetration ducting has a minimum of 50 mm insulation.
The length of the penetration ducting depends on the pitch of the roof:
Pitch 0°-30° = length 900 mm ∙ Pitch 31°-45° = length 1200 mm
Also available in black, at extra charge.
Ød
AML 100 / CV 80
250
CV 200
260
AML 300 / AMP 300
315
AML 500 / AMP 500
355
AML 800 / AMP 800
AMP 900 / AMP 1200
CV1000
450
AMP 1200
500
Ød = internal diameter
Roof flashing is available in galvanised metal or as grey Perform sheeting;
both come with a galvanised metal pipe collar
Also available in black, at extra charge.
L = AMP 900 / AMP 1200 depending on pitch